On all models, the rotation speed is infinitely variable (see datasheet). The drivers for turning of the faceplate and tilting as well as the electrical control are located in protective housings. On all models, the tilting angle is 135° infinitely variable from the horizontal faceplate to the 45° negative tilted face plate
ELECTRICAL CONTROL
On the models R 50, R 100, and R 300, the setting of the forward-stop-reverse rotation as well as the speed of the rotation are set at the front of the machine which is switched on and off by a remote footswitch. As an option, these models co... Read More >>
| Model No | A | B | C | D | D1 | H | Rotation speed AMP | Pilot hole (mm) | Max. Welding current (A) | Remarks | Power requirement (Changes possible) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| R50 | 350 | 250 | 415 | 300 | - | 335 | 0 bis 6 | - | 400 | Tilted manually: Locked by clamping | 230 V, 1 Ph., 50 Hz |
| R100 | 450 | 300 | 465 | 400 | - | 365 | 0 bis 6 | - | 400 | Tilted manually: Locked by clamping | 230 V, 1 Ph., 50 Hz |
| R300 | - | - | - | - | - | - | 0 bis 3 | - | 400 | Tilted by worm gear and handwheel | 230 V, 1 Ph., 50 Hz |
| R500 | 860 | 700 | 930 | 650 | - | 800 | 0 bis 2,5 | 50 | 400 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R750 | 1140 | 770 | 1000 | 700 | 830 | 800 | 0 bis 2 | 60 | 400 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R1500 | 1500 | 1105 | 1145 | 1000 | 1200 | 945 | 0 bis 1,5 | on request | 600 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R3000 | 1700 | 1180 | 1180 | 1100 | 1300 | 1040 | 0 bis 1 | on request | 600 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R5000 | 1900 | 1300 | 1220 | 1200 | 1420 | 1150 | 0 bis 1 | on request | 600 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R7500 | 2400 | 1600 | 1600 | 1250 | 1800 | 1450 | 0 bis 1 | on request | 600 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
| R10000 | 2650 | 1700 | 1680 | 1300 | 1840 | 1500 | 0 bis 1 | on request | 600 | Motorized tilt | 400 V, 3 Ph. + N, 50 Hz |
