Applications
Pipe Rotators - U150
The electric control as well as the tilting drive are located in the frame. Tilting is carried out manually (U 150 and U 500) or motorized (U 1000, optional U 500) the tilting angle is approx. 135°. The tilting section consists of drive and roller box, holding column, clamping arm and pressure roller.
This machine is also available as a non tilting version (designation: U 150H, U 500H, U 1000H). In general, drives and electric controls of the U-series are protected in the frame or in a control panel.
ELECTRIC CONTROL
Rotary speed and direction are set at the... Read More >>
| Specification | Value |
|---|---|
| Rotary speed | infinitely variable 0-120 cm/min (0 – 50 inch/min) |
| Pipe range with clamped pipe | 20-200 mm incl (1 – 8 inch incl) |
| Pipe range with unclamped pipe | 20-approx. 300 mm (1 – approx. 12 inch) |
| Max. tilting moment in relation to axis of tilt | 1500 cmkg ( 1300 inch*lbs) |
| Max. load (horizontal) | 300kg (660 lbs) on each rotator and roller support frame |
| Max. load (vertical) | 150 kg (330 lbs) |
| Torque at drive roller | 500 cmkg (430 inch*lbs) |
| Power requirement | approx. 500 VA, 230 V, 1ph |
Base trolley, wheels can be steered and locked in position
Roller support frame
Set of rubber coated rollers for idler frames.
Face plate
Holding attachment for cutting torch or MIG/MAG torch, without double slide round joints.
Clamping attachment for pipe bends and acute pipe bends
Set of clamps (dia 100, 125, 150, 200)
Set of clamps (dia 100, 125, 150, 200)
Set of rubber coated rollers
Set of rubber coated rollers for clamping and turning of lobster backs
Set of stainless steel rollers
Base trolley, wheels can be steered and locked in position
Holding attachment for cutting torch or MIG/MAG torch, with double slide